Blogs
Directory
Building Equipment
Latest forum activity
- February 15 - anders on Wall Design ideas
- February 5 - Kim on Are F&B paints worth the money?
- January 30 - Anthony Richardson on Be safe in your home
-
January 20 - Steve
on
Ariston clas He Condensing Combi 30kw ERROR codes - January 16 - linda on getting chunky woodchip
-
January 11 - keith
on
Water Leak Detection -
January 11 - keith johnson
on
Fitting Britony Diaphragm -
January 4 - Herbert
on
Sink & Diswahser Waste Pipes - January 4 - Matt Crawford on Cheap Supplies
-
December 30 - London Painter
on
Matt paint on Silk...disaster..Help!!
Building Products
Latest article comments
-
December 12 - The Building Experience
TBE Wheel Chair Basketball -
September 28 - The Building Experience
The Chisel Off! -
June 14 - The Building Experience
Brazilian Black Slate Bathroom
Copyright (c) 2007. The Building Experience Ltd. Registered England and Wales. No: 6245614. All rights reserved
Terms & Conditions
Planning wiring for an extension and outdoor low energy lights are required to be switched on with a timer switch.
Would these lights be best fed off a fused spur of the ring, then into a timer? I have found 1 timer with a fcu built in, which looks ideal.
http://gil-lec.co.uk/products/Controllers/Timers/Fused+Spur+Timers/24hr+Fused+Spur+Timer/2669251973
Only problem is that in the spec it says it needs 40w minimum current (says per bulb). Looking to install 8 x 5w low wattage units, so just in!!!
Has anybody any experience with low wattage lights and switch timers who could advise thanks..
David